VBA-M Forums

Full Version: Unable to get my PC to detect controller and mem card
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I have a third party xbox controller (Powerpad), and a unnamed third party memory card plugged into that controller. The connection looks like this:

Xbox controller w/ mem card inserted (xbox cable, "spliced to" usb cable) into PC.

The PC recognizes the controller in USBview as this:


External Hub: USB#VID_FFFF&PID_FFFF#5&13ae804d&0&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
Hub Power: Bus Power
Number of Ports: 3
Power switching: Individual
Compound device: Yes
Over-current Protection: Individual

Device Descriptor:
bcdUSB: 0x0110
bDeviceClass: 0x09
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 (64)
idVendor: 0xFFFF
idProduct: 0xFFFF
bcdDevice: 0x0100
iManufacturer: 0x00
iProduct: 0x00
iSerialNumber: 0x00
bNumConfigurations: 0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x02
Open Pipes: 1

Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0001 (1)
bInterval: 0xFF

Configuration Descriptor:
wTotalLength: 0x0019
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0xA0 (Bus Powered Remote Wakeup)
MaxPower: 0x20 (64 Ma)

Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x01
bInterfaceClass: 0x09 (Hub)
bInterfaceSubClass: 0x00
bInterfaceProtocol: 0x00
iInterface: 0x00

Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0001 (1)
bInterval: 0xFF

Whenever I plug in the memory card, the PC acknowledges it and fails to install drivers for it (which is normal), but it doesn't show anywhere in USBView (should show up in the hub but does not).

Whenever I install XBCD, the drivers install fine, its just that it does nothing, the controller still doesn't respond and Action Replay still does not recognize my controller or memory card.
I don't recall adding any PowerPad devices to the driver, and i only see the device id info for the hub itself, rather than the attached pad.

There is no 64bit driver for the XBOX mem card available anyway, and i don't plan on taking up that side project of Redcl0uds at all.
Reference URL's