<![CDATA[VBA-M Forums

<![CDATA[VBA-M Forums - Control]]> http://vba-m.com/forum/ Tue, 07 Sep 2010 13:07:24 +0000 MyBB <![CDATA[background keyboard input problem]]> http://vba-m.com/forum/showthread.php?tid=546 Tue, 17 Aug 2010 06:02:44 +0000 http://vba-m.com/forum/showthread.php?tid=546 My english is poor,if you can not understand all what i say,please forgive me. Ashamed

1.If i enable the emulator to run in background,now the emulator is emulating a game,and i let the emulator window inactive,when i hit the keyboard or press the joypad buttons in another window ,the emulator will receive the input message.In my opinion,this is very bad Sad

2.The sound problem in loading a game from a save state,not only the gb games,but also gba games,the sound will disappear partly.The game i tested is Fire Emblem - The Sacred Stones.Load the game from a save state,and the sound will leave playing background music only.The special sound disppeared.
3.The emulator will pause even if i disable the option "pause when inactive" when the emulator window is minimized,i want the emulator to run background when the emulator is minimized Smile

4.The emulator will crash when playing some gb/gbc games,but the vba1.7.2 version do not have this problem...

I know this is the Control sub-forum,but i post more than the control problems,if this is not allowed, please forgive me.
I have some programming skill,and I hope for the next release of vba-m Msn_grin

Thanks all your great work on vba-m. Big Grin

]]> My english is poor,if you can not understand all what i say,please forgive me. Ashamed

Thanks all your great work on vba-m. Big Grin

]]> <![CDATA[Enquiry on screen capture control for Mac VBA]]> http://vba-m.com/forum/showthread.php?tid=429 Wed, 21 Oct 2009 13:56:33 +0000 http://vba-m.com/forum/showthread.php?tid=429 Thank you.]]> Thank you.]]> <![CDATA[Control problem]]> http://vba-m.com/forum/showthread.php?tid=428 Sun, 18 Oct 2009 20:52:38 +0000 http://vba-m.com/forum/showthread.php?tid=428
I have version 1.7.2

I have this problem; the cursor in a game keeps constantly scrolling as if the up or down arrow were constantly pressed. "hen I try to configure the joypad the words UP ARROW start appearing in each of the cells.

I have tried to fix this problem without posting including fiddling around with the emulator, reading the readme, and searching for similar problems on the internet.

Thanks for helping me.]]>
I have version 1.7.2

I have this problem; the cursor in a game keeps constantly scrolling as if the up or down arrow were constantly pressed. "hen I try to configure the joypad the words UP ARROW start appearing in each of the cells.

I have tried to fix this problem without posting including fiddling around with the emulator, reading the readme, and searching for similar problems on the internet.

Thanks for helping me.]]> <![CDATA[Problems at pressing two buttons at once]]> http://vba-m.com/forum/showthread.php?tid=403 Sun, 23 Aug 2009 22:36:12 +0000 http://vba-m.com/forum/showthread.php?tid=403
I wanted to ask if someone had the same problem as me. It seems to be hardware-like. I got a notebook ASUS EeePC at 1.66GHz 1GB RAM. The matter is that I can't enjoy games as Mario Land or those in Super Mario Advance 1-2-3-4 because of the following: I cannot run and jump.

For instance, in Mario Advance 2 (Super Mario World), I try to go to the right of the scenario with B button pressed, then jump with A, and it does not work. However, going from right to left it works (not left to right).

Has anyone experienced with its hardware any bug of no response to 2 keys at the same time? Ideas are welcome, either any config to apply.

Thanks.]]>
I wanted to ask if someone had the same problem as me. It seems to be hardware-like. I got a notebook ASUS EeePC at 1.66GHz 1GB RAM. The matter is that I can't enjoy games as Mario Land or those in Super Mario Advance 1-2-3-4 because of the following: I cannot run and jump.

For instance, in Mario Advance 2 (Super Mario World), I try to go to the right of the scenario with B button pressed, then jump with A, and it does not work. However, going from right to left it works (not left to right).

Has anyone experienced with its hardware any bug of no response to 2 keys at the same time? Ideas are welcome, either any config to apply.

Thanks.]]> <![CDATA[Dinput Joystick/joypad support iffy.]]> http://vba-m.com/forum/showthread.php?tid=182 Wed, 23 Jul 2008 23:12:44 +0000 http://vba-m.com/forum/showthread.php?tid=182
with my own gamepad

Left stick
(X) Left-Right = Displays as X-
(Y) Up-Down = Displays as X+

Right Stick (R stands for Rotation)
RX = Displays as Joy Up and Joy Down, rather then RX+ and RX-
RY = + and - work properly.

Triggers (By default, they are usually on 1 Z axis but this makes pressing both at the same time impossible, i'll show the results of single axis first)
(Z-) L Trigger = Displays as Joy 1 left
(Z+) R Trigger = Displays as Joy 1 Right

I have them set on seperate axis
(Z-) L Trigger = Displays as Joy Left
(RZ-) R Trigger = Displays as Z Rotation - (Expected behavior)
Setting both triggers to the RZ axis results in the correct behavior

I'm not sure when this problem started occuring, however it works correctly in VBA 1.8

1.8's behavior is as following

Left Stick
X Axis = displays as joy left and right
Y Axis = displays as joy up and down

Right Stick
RX = X Rotation +-
RY = Y Rotation +-

Triggers
Z+- and RZ+- both work.

It seems only the axis functions are effected.

]]>
with my own gamepad

Left stick
(X) Left-Right = Displays as X-
(Y) Up-Down = Displays as X+

Right Stick (R stands for Rotation)
RX = Displays as Joy Up and Joy Down, rather then RX+ and RX-
RY = + and - work properly.

Triggers (By default, they are usually on 1 Z axis but this makes pressing both at the same time impossible, i'll show the results of single axis first)
(Z-) L Trigger = Displays as Joy 1 left
(Z+) R Trigger = Displays as Joy 1 Right

I have them set on seperate axis
(Z-) L Trigger = Displays as Joy Left
(RZ-) R Trigger = Displays as Z Rotation - (Expected behavior)
Setting both triggers to the RZ axis results in the correct behavior

I'm not sure when this problem started occuring, however it works correctly in VBA 1.8

1.8's behavior is as following

Left Stick
X Axis = displays as joy left and right
Y Axis = displays as joy up and down

Right Stick
RX = X Rotation +-
RY = Y Rotation +-

Triggers
Z+- and RZ+- both work.

It seems only the axis functions are effected.

]]> <![CDATA[SDL and GTK problems]]> http://vba-m.com/forum/showthread.php?tid=107 Fri, 23 May 2008 14:23:17 +0000 http://vba-m.com/forum/showthread.php?tid=107
First, excuse me for my poor english, I'm french and everybody knows that frenchies are not really good for foreign languages.

I used VBA before and found, yesterday, the "new" vba. Very happy am I.

So I downloaded SVN version this morning and compiled it on my Linux machine with SDL GUI.

I was verry surprized to see that the "video" key was no longer understood and to have a really small window (I use a 1600X1400 screen).

So I decided to try GTK version.

But.......

It is impossible to configure my joypad with this GUI. I thought it was because of a problem with my GTK configuration but "jscalibrate" works fine, as "kcontrol"

I tried with the SDL version all is good.

This is my old configuration file for VBA SDL, only part for the joystick.

Joy0_Left=1000
Joy0_Right=1001
Joy0_Up=1002
Joy0_Down=1003
Joy0_A=108a
Joy0_B=108b
Joy0_L=0061
Joy0_R=0073
Joy0_Start=1088
Joy0_Select=1089
Joy0_Speed=1086
Joy0_Capture=1087

These values were gave by SDL-Test and work fine.

If somebody knows how to configure joystick under GTK GUI and/or have a window greater in with SDL Gui he would be very welcomed.

Thank you]]>
First, excuse me for my poor english, I'm french and everybody knows that frenchies are not really good for foreign languages.

I used VBA before and found, yesterday, the "new" vba. Very happy am I.

So I downloaded SVN version this morning and compiled it on my Linux machine with SDL GUI.

I was verry surprized to see that the "video" key was no longer understood and to have a really small window (I use a 1600X1400 screen).

So I decided to try GTK version.

But.......

It is impossible to configure my joypad with this GUI. I thought it was because of a problem with my GTK configuration but "jscalibrate" works fine, as "kcontrol"

I tried with the SDL version all is good.

This is my old configuration file for VBA SDL, only part for the joystick.

Joy0_Left=1000
Joy0_Right=1001
Joy0_Up=1002
Joy0_Down=1003
Joy0_A=108a
Joy0_B=108b
Joy0_L=0061
Joy0_R=0073
Joy0_Start=1088
Joy0_Select=1089
Joy0_Speed=1086
Joy0_Capture=1087

These values were gave by SDL-Test and work fine.

If somebody knows how to configure joystick under GTK GUI and/or have a window greater in with SDL Gui he would be very welcomed.

Thank you]]> <![CDATA[[FIXED]B and A buttons inverted in default keymapping]]> http://vba-m.com/forum/showthread.php?tid=12 Wed, 19 Mar 2008 01:24:23 +0000 http://vba-m.com/forum/showthread.php?tid=12 Z should act as B, and X should act as A, not the other way around.]]> Z should act as B, and X should act as A, not the other way around.]]>